Classic flooring made of solid oak conveys warmth and beauty to interiors. The solid boards ensure good thermal insulation, dampen noise and improve the feeling of comfort.
The boards must be glued to a dry, flat surface. Thanks to the gluing process, the movement of the boards is minimal, the floor obtained is firm and completely silent.
They can be installed with a VARIETY OF DESIGNS, from more traditional to more casual: parallel with regular joints, parallel with irregular joints, diagonal, herringbone, geometric figures...
As the sanding and finishing work has to be done after the boards have been laid, the customer can create FULLY PERSONALISED ENVIRONMENTS. The many surface treatments that exist today (oils, dyes, varnishes...) make it possible to create rooms with every look and effect imaginable.
Lamparquet can be sanded several times to renew the surface completely and increase its service life. If any part is accidentally damaged, it can be replaced simply and cheaply without the need for major work and/or investments.
USUAL MEASUREMENTS of the boards: 250x50x10 mm and 300x60x10 mm. For other measurements, please contact us.
We grade parquet according to our customers' specific demands. STANDARD GRADES are:
The surface is smooth with no knots or sapwood. Beautiful veins with slight differences in tone. There may be occasional, small and healthy knots of the same colour as the rest of the surface.
The presence of sapwood is allowed up to 30% of the width of the boards. Beautiful veins with slight differences in tone. There may be occasional, small and healthy knots of the same colour as the rest of the surface.
Healthy knots are allowed up to 10 mm in diameter. It is more heavily veined and the surface patterns are more marked. No sapwood.
Healthy knots are allowed up to 10 mm in diameter. The presence of sapwood is allowed, as well as heavy veins and greater tone differences.